• 01-banner-Avery
  • 02-banner-Hp
  • 03-banner-Simona
  • 04-banner-Encore
  • 05-banner-Summa
  • 06-banner-Mecanumeric
  • 07-banner-heytex
  • 08-banner-stadur
  • 09-banner-aristo
  • 01-avery-dennison-logo
  • 02-Hp-logo1
  • 03-simona-logo
  • 04-encore_logo
  • 05-heytex-logo
  • 06-summa-logo
  • 07-stadur-logo-HKS
  • 08-mecanumeric-logo
  • 10-American-Bilrite-logo
  • 11-aristo-logo

CNC Routers

08-mecanumeric-logo

 

 

MecaEasy

An offer of “pack” machines, already configured for your requirements, and existing in two working areas : 1500 x 3000 mm and 2000 x 3000 mm

MecaEasy Entry pack for all users requiring a powerful 4.2 KW (or 5.5 HP) electro spindle, rotating at 24.000 RPM, allowing the tool tightening until 20 mm diameter thanks to the ER32 collets with manual tool change, combined with a vacuum table by side channel blowers and selectable zones.

MecaEasy ATC pack (automatic tool change), for milling works requesting a frequent and fast tool change. This pack is equipped with a 2.5 KW (3.5 HP) electro spindle with automatic tool change, rotating till 24000 RPM, combined with a static tool shop for 6 tools maximum diameter, mounted on ISO25 cones and always completed by a vacuum table with selectable zones.

MecaEasy DGPM pack (digital printing manual) for cutting applications on materials in pre-printed plates. In addition to the 4.2 KW milling electro spindle with manual tool change, the machine is equipped with a tangential control secondary head and can take many tools (vibrating knife, non vibrating knife, cutting wheel for very soft fabric and materials, grooving wheel for packaging applications,…). In addition, a vision registration/compensation system is available as option and can receive the main cameras on the market (OPTISCOUT, ICUT, GTK).

MecaEasy DGPA pack (Digital printing automatic) for cutting applications on pre-printed materials requiring the use of many milling tools. The equipment is fitted with an automatic tool change electro spindle with a tool shop for 6 ISO25 cones.

All these “packs” configurations benefit from technical solutions which have made the quality of Mecanumeric milling products :
  • Mono bloc welded steel frame and mobile steel gantry.
  • Transmission on the 3 axes by precision ball screws and guidance by precision linear rails with preloaded ball slides.
  • MecanumericCN7000 numerical control with colour touch screen 10.4 inches, and motorization by brushless servomotors.
  • Sensor for tool Z setting and series laser pointer

 
pdf MECAEASY.pdf 

MecaPlus

Optimized for machining aluminium, plastic materials in strong thickness and composite materials with high mechanical characteristics.



High Productivity 3 axes milling equipment:

Precision milling machine of simple use for machining rigid plate materials in strong thickness in the sectors of plastic, modelling, aeronautics, aluminium transformation advertising and POP or for machining 3D molds and models.
Materials to be used (according to the selected spindle and tool) on:


Plastic, rigid foams, semi rigid foams, composite materials for building, Composite materials for industry, wood and by-products, polyester resins, light alloys with aluminum base or copper base, steel and stainless steel, Soft stones, marble, granite (only engraving).

Available sizes:

Model

X axis

Y axis mm

Z axis travel
standard/option


MPL2010

2100mm

1060mm

275/500mm

MPL3115

3110mm

1560mm

275/500mm

MPL3121

3110mm

2100mm

275/500mm

MPL4121

4100mm

2100mm

275/500mm

MPL6121

6100mm

2100mm

275/500mm



Technologies:

  • Structure with fix table and moving gantry.
  • High inertia welded frame and moving gantry.
  • Vacuum table in aluminium profiles or composite
  • Holding of plates by vacuum generated either by side channel blowers, or by claw vacuum pumps. Selection of the zones by manual valves or automatic valves option.
  • Motorisation: AC Brushless servomotors on 4 axes (X1-X2-Y-Z). Double driving on X axis.
  • Transmission: high precision ball screw on all axes (diameter 40 mm or 63 mm).
  • Guidance : grinded steel rails and preloaded ball bearings
  • Power Automation Mecanumeric CN7000 numerical control with 15 inches touch screen, hardware integrated, Data input by Ethernet link, USB port, import of ISO code files(In option SIEMENS 840 or FANUC 16 O).



Available Electrospindles:

  • D65 : 40000 RPM maximum – 6500 W S1, water cooling – automatic tool change by cones HSK E32 and collets EX25 (1 to 13 mm).
  • HF100 : 40000 RPM maximum – 6500 W S1, water cooling – automatic tool change by cones SKI25 and collets EX25 (1 to 13 mm).
  • HF120 : 32000 RPM maximum – 13000 W S1, water cooling – automatic tool change by cones HSKE32 and collets EX25 (1 to 13 mm).
  • D15 : 24000 RPM maximum – 15000 W S1, water cooling – automatic tool change by cones HSKF63 and collets EX32 (1 to 20 mm).
  • D18 : 24000 RPM maximum – 18000 W S1, water cooling – automatic tool change by cones HSKF63 and collets EX32 (1 to 10 mm).
  • D10R : 24000 RPM maximum – 10000 W S1, water cooling – automatic tool change by cones HSKF63 and collets EX32 (1 to 10 mm) special spindle for use with 4th and 5th axis.



Options:

  • Suction of milling chips by professional suction device – power 4000 W (ASP40) or 7500 (ASP75) with high capacity tank and manual or automatic declogging.
  • Vacuum table with 2, 4 or 6 SIEMENS NASH ELMO ® side channel blowers 5.5 kw, 900 m3/h, vacuum 190 mbars or by 2 or 4 SIEMENS NASH ELMO ® side channel blowers 7.5 kw, 500 m3/h, vacuum 360 mbars.
  • Vacuum table with 1 to 3 BUSCH® claw pumps 4.5 KW, 250 m3/h, vacuum 880 mbars with surge tank and safety vacuum switches.
  • Rotative tool shop fixed under gantry (CH12R) with capacity 12 cones with tool length sensor.
  • Tool coolant by oil spraying capacity 2l/h, 6 l. tank (LUB2) or high capacity 6 l/h, 40 l tank (LUB6).
  • Tool / material cooling system by frozen air (AIRGEL).
  • Multifunction heads options (M3TH) for 3 tools with tangential control
  • Cutting knife for material thickness <2 mm
  • Vibrating cutting knife for light and alveolar materials till 15 mm thickness
  • Grooving tool for packaging application
  • (GRAFITRONIKS@, OPTISCOUT®, ICUT®) vision registration/compensation system.

pdf
 MECAPLUS.pdf

MecaPro

For professionals, this milling equipment range offers excellent price ratio/performances, in many industrial sectors.

3 axes Milling equipment :

Precision milling/cutting machine (router) with simple use for machining plate materials in the sectors of advertising, sign, sign board, POP, plastics, aluminum transformation etc .

Some of the materials to be used (according to the selected spindle and tool) on:

Plastic, rigid foams, semi rigid foams, composite materials for building, Composite materials for industry, wood and by-products, polyester resins, light alloys with aluminum base or copper base, steel and stainless steel, Soft stones, marble, granite (only engraving).


Available sizes :

Model

X axis

Y axis

Z axis standard/option

MPR1015

1020mm

1520mm

250/400mm

MPR3015

3050 mm

1520mm

250/400mm

MPR3020

3050 mm

2020 mm

250/400mm

MPR4020

4050 mm

2020 mm

250/400mm

MPR6020

6050 mm

2020 mm

250/400mm



Technologies

  • Structure with fix table and moving gantry.
  • High inertia welded frame and moving gantry.
  • Vacuum table in aluminium profiles or composite
  • Holding of plates by vacuum generated either by side channel blowers, or by claw vacuum pumps. Selection of the zones by manual valves or automatic valves option.
  • Motorisation: AC Brushless servomotors on 4 axes (X1-X2-Y-Z). Double driving on X axis.
  • Transmission: high precision ball screw on all axes.
  • Guidance : grinded steel rails and preloaded ball bearings

POWER AUTOMATION MECANUMERIC CN7000 numerical control with 15 inches touch screen, hardware integrated, Data input by Ethernet link, USB port, import of ISO code files.

 
Available Electrospindles :

  • SEV1090 : 24000 RPM maximum – 4500 W S1, air cooling – manual tool change by collets ER32 (1 to 20 mm).
  • ES919 : 28000 RPM – 7500 W S1, air cooling – automatic tool change by ISO30 cones and collets ER32 (1 to 20 mm).
  • OM7SC : 28000 RPM maximum – 7500 W S1, air cooling – automatic tool change by ISO30 cones and collets ER32 (1 to 20 mm).
  • D65 : 40000 RPM maximum – 6500 W S1, water cooling – automatic tool change by HSK E32 cones and collets EX25 (1 to 13 mm).
  • HF80 : 40000 RPM maximum – 2500 W S1, water cooling – automatic tool change by SKI20 cones and collets EX20 (1 to 10 mm).


Options :

  • Suction of milling chips by professional suction device – power 2200 W (ASP22), 4000 W (ASP40) or 7500 W (ASP75) with high capacity tank and manual or automatic declogging.
  • Vacuum table with 2,4 or 8 SIEMENS NASH ELMO ® side channel blowers 2.2 kw, 310 m3/h, vacuum 190 mbars or by 2 or 4 SIEMENS NASH ELMO ® side channel blowers 5.5 kw, 900 m3/h, vacuum 190 mbars or by 2 or 4 SIEMENS NASH ELMO ® side channel blowers 7.5 kW, 500 m3/h, vacuum 360 mbars..
  • Vacuum table with 1 to 3 BUSCH® claw pumps 4.5 KW, 250 m3/h, vacuum 880 mbars with surge tank and safety vacuum switches.
  • Static tool shop (CH6S or CH12S) or rotative (CH6R) integrated under gantry with capacity 6 cones ISO30 or HSKE32 with tool length sensor.
  • Tool coolant by oil spraying capacity 2l/h, 6 l. tank (LUB2) or high capacity 6 l/h, 40 l tank (LUB6).
  • Tool / material cooling system by frozen air (AIRGEL).
  • Multifunction heads options (M3TH) for 3 tools with tangential control
  • Cutting knife for material thickness <2 mm
  • Vibrating cutting knife for light and alveolar materials till 15 mm thickness
  • Grooving tool for packaging application



(GRAFITRONIKS®, OPTISCOUT®, ICUT®) vision registration/compensation system by camera. 


pdf MECAPRO.pdf 

 

Equipment

Contact us

contact-us

+30 210 5143 101

We would be happy to hear from you.

Contact us